Company profile
Chairman's speech
Company honor
Corporate culture
Enterprise environment
Water Conservancy and Water Works 
Building HVAC
Technical team
Production team
After sales service commitment
Technical data download
ERP order query
Company news
Industry dynamic
Technical knowledge
Headquarters
Domestic sales department
International business division
Your location is:Industry&products >> Electric valve >> VB7200 cast iron two-way three-way regulating valve
VB7200 cast iron two-way three-way regulating valve
Product overview
It is used to control the opening or closing of pipes in cold or hot water air conditioning system to control the room temperature.
The driver is driven by a unidirectional hysteresis synchronous motor and the valve springs back.
When the valve is not working, it is normally closed. When it needs to work, it is provided by the temperature controller with an opening signal, which makes the electric valve switch on the AC power and act. When the valve is opened, chilled water or hot water enters the fan coil to provide cool air or warm air for the room.
When the room temperature reaches the thermostat, the thermostat disconnects the electric valve and the reset spring closes the valve, thereby cutting off the flow of water into the fan coil.
Close and open the valve so that the room temperature is always within the temperature range set by the temperature control.
The driver is driven by a unidirectional hysteresis synchronous motor and the valve springs back.
When the valve is not working, it is normally closed. When it needs to work, it is provided by the temperature controller with an opening signal, which makes the electric valve switch on the AC power and act. When the valve is opened, chilled water or hot water enters the fan coil to provide cool air or warm air for the room.
When the room temperature reaches the thermostat, the thermostat disconnects the electric valve and the reset spring closes the valve, thereby cutting off the flow of water into the fan coil.
Close and open the valve so that the room temperature is always within the temperature range set by the temperature control.
Product details
Application and application scope of the product:
The electric control valve is a device that can automatically adjust and control the flow rate of the pipeline. It is suitable for continuous regulation and control of sequence and hot water in heating, ventilation and air conditioning systems. Such as: air conditioning ventilation equipment waterway control, heating equipment hydraulic control. The working principle of the electric two-way valve is that under the action of the actuator, the valve stem drives the valve disc to move up or down, changing the flow area between the valve disc and the valve seat, so as to adjust and control the flow of medium.
Characteristic:
1. Low AC voltage reversible synchronous motor drive with magnetic clutch.
2. Movement is transmitted by gears. The output gear screw group is supported by a plane rolling bearing rotating around the central shaft, and the valve shaft is connected by a central screw sleeve and a positioning scale.
3. Valve opening indicator.
4. Manual and two additional control levers.
5. It is suitable for 15mm, 17mm or 19mm, 22mm (vb1200 / vb1300) / 24mm, 36mm, 40mm, 42mm (vb4200 / vb4300). For incremental feedback or proportional control, the stroke used is selected by a line.
6. Proportional type 0-10V or 4-20mA DC control, can be jumper selection forward or reverse operation.
Matters needing attention:
1. The drive must be protected to prevent water leakage from damaging internal parts and motors.
2. The drive must not be covered with insulation.
3. When repairing the driver, the power supply must be turned off to prevent damage to the machine parts and cause electric leakage to cause casualties.
4. Do not attempt to connect or remove wires when the power supply is connected.
5. The voltage regulating type controls the opening stroke through 0-10vdc voltage.
6. The current regulating type controls the opening stroke by 4-20mA current.
Previous：VB3200 series electric control valve
+86-21-66059111
